| Welcome to 3T! Please take the time to register and join in on the friendly,knowledgeable watch talk.Please note that not all registrations will receive an immediate activation e-mail.Those who do not receive an immediate notification will be activated manually within 48hrs. by an admin. without an e-mail activation url sent to you,you may then sign in using your username and password,if you feel there is a problem please e-mail us at timetechtalk@hotmail.com and include your name and username and we activate your account.Thank You! |
| Moderated by: 3T | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Graham 3T WIS
|
Some of you might remember this watch, which I've owned for many years. It has experienced some tough times with me, and was my daily watch for 8 years when I was a professional hunting guide. ![]() The watch needs a complete revamp, but I have decided to do a sympathetic restoration of the dial and hands, retaining some of the attractive patina which comes with age. The case is in great condition, but needs a refinish to Rolex standards. The caseback looks terrible. At some stage in its murky past someone tried to open the caseback with a dodgy tool(s).:X ![]() I have decided to send the case and caseback to a well known restoration specialist in the US for the work needed. The movement runs well, but the auto wind function has long stopped functioning. It turns out that this movement - the cal. 390 Tudor, is absolute hen's teeth. Spares are very scarce, and EXPENSIVE if you do find them. ![]() I managed to find a complete replacement movement from a watchmaker in Denmark. It is on the way! Once it arrives and after I have assessed both movements, I might do a swop out or just use the necessary parts from the replacement movement. The cost? Too much $$$! The dial and hands will also be on the way to the US tomorrow for a clean and relume. The work done locally doesn't impress me. This is what I did yesterday, pulling apart a running watch: ![]() I have already secured a new bezel and insert, as well as a replacement plastic crystal. The original Oyster bracelet (riveted links) will also be polished. I'm still looking for the correct end links. Mine are mangled and not worth using again. Anyway, hope you found this interesting. This "rose" model 7928 Tudor is very sought after by collectors, and they fetch silly money at the moment. Mine has sentimental value, so I won't be selling......... I will update this thread when I have something to add. |
|||||||||
|
aujang 3T WIS
|
That is simply an awesome Sub! yourock.gif Best of luck with the restoration. Can't wait to see how it turns out. |
|||||||||
|
murphy j 3T WIS
|
I Love those old Tudors. I too look forward to seeing how the restoration turns out. |
|||||||||
|
Nabco 3T WIS
|
Looking forward to your updates Graham hand6.gif Good Luck |
|||||||||
|
Simon_Leung 3T WIS
|
Those 17 Jewel Tudor Rose Submariners are rare. However, I admire your dedication to restore yours to new. All the best. Cheers, Simon |
|||||||||
|
Hammerfjord Moderator
|
Nice project! Looks good and will certainly go well. Nice vintage movement by the way! But the case-back had his teeth well damaged...Maybe you go for a new case-back if you find one in the future...? Good luck Graham!;) |
|||||||||
|
Graham 3T WIS
|
Hammerfjord wrote: Nice project! Looks good and will certainly go well. Nice vintage movement by the way!William Believe it or not, there was a caseback on Ebay a while ago, but it went for more than $400........ This one is restorable - the grooves are mostly intact. I have a Rolex case back opening tool, and it still works fine on that one. The total project is going to be in the region of $675 as it stands now....:? Thanks for the other positive remarks, guys! I'm really looking forward to getting this all together again. |
|||||||||
|
Hammerfjord Moderator
|
I see... The craze on Ebay is that when they outbid each-others, they get mad, push the limits and after it's often more about the victory than the cost. That's why I allways come at the last second to finish them off if I really want something coz bidding just send oil on them fire. Too many "pride&honnor" idiots who live on the credit-cards(ghost-money) there. |
|||||||||
|
Graham 3T WIS
|
William, you have such a way with words! I agree. The Bay is a mad place.... |
|||||||||
|
Hammerfjord Moderator
|
Graham wrote:William, you have such a way with words! I know Graham... I have to hold on my reputation of poet |
|||||||||
|
Paxman 3T WIS
|
Great project on a lovely time piece.:D I'm glad you are going to retain some of the original look with the dial. |
|||||||||
|
Graham 3T WIS
|
Paxman wrote: Great project on a lovely time piece.:D I'm glad you are going to retain some of the original look with the dial.Thanks Mark. Yes, I'm partial towards retaining some of the patina and character of the watch. I guess that attitude spilled over from restoring so many vintage cars over the years.... |
|||||||||
|
Graham 3T WIS
|
Well, at long last the project is gaining momentum. I have received the case and caseback as well as the riveted bracelet back from Charles Bija (watchspot.net) who did a wonderful job of polishing these items. Look at the pic of the caseback posted at the beginning of this thread, and compare it to its current state: ![]() Obviously there is only so much you can do to such a damaged caseback, but I am most impressed at the result. As you can see, the case and bracelet also came out really well. As with any 45 year old watch, there are obviously some remaining marks which are simply too deep to polish out. Overall, a result which far exceeded my expectations. ![]() ![]() I used a dremel tool to trim the outside edge of the newly acquired plexiglass. It is quite a mission, and requires a lot of patience. The inner diameter is a very tight fit over the outer rim of the front of the case, without any gaskets. After installation, the retaining ring fits around the glass and secures it, while at the same time it allows the bezel to clip onto it. No gaskets anywhere, purely friction. Therefore the fit of the ring over the glass is crucial. (I'll admit to destroying one of these when I first tried to replace a glass on this watch years ago). ![]() After having fitted the new bezel insert, the friction ring was put in place and the bezel clicked home. I couldn't resist screwing the crown and stem home and fitting the bracelet to see the result..... ![]() ![]() As I mentioned at the start of the thread, I managed to find a complete replacement movement for the watch. I consider myself very fortunate, since the cal. 390 Tudor movement is really scarce. Spares are too. Anyway, this movement arrived from Denmark a while ago. It is running fine and has a good power reserve. The rotor winds the movement just fine. However, it needs a full service as the amplitude is in the low 150's. I have decided to swop the movements and keep the original as a spare. It still runs well, but the automatic wind no longer works due to wear of the reverser wheels. The movements are identical, although the original one was rhodium plated, not rose gold tinted like the replacement. I have seen both versions being used in the 7928 subs. ![]() Interestingly, most sources will claim that this movement was made by Rolex. The fact is that it is actually a FEF calibre 350 movement. Back to the project: The dial and hands were sent to Kent Parks of Everest watchworks. He came highly recommended by a number of WIS. The brief was for him to do a sympathetic relume of the dial and hands so as to retain some of the patinated appeal. After a long and frustrating ordeal, he at long last sent me these pics yesterday of the completed job. ![]() ![]() Obviously I will have to wait another two weeks or so for these to arrive from the US, so I will comment on the job once I get the dial and hands back. At this point I must add that I cannot endorse Kent's work ethic. I had a very bad experience with him. Anyway, I just hope this last hurdle won't hold up the project for too much longer. All that remains to be done is a full service of the movement. I'll post the final result once I have everything assembled. Thanks for your interest in my little project so far! Last edited on Wed Apr 21st, 2010 09:27 am by Graham |
|||||||||
|
Paxman 3T WIS
|
The work on the case and bracelet look great, Graham. As does the dial. I can't wait to see this all put together. Great project! |
|||||||||
|
natevan70 3T WIS
|
Some delays aside; it looks like a success! |
|||||||||
|
oagaspar Site Founder
|
coming along with awesome results Graham....Congrats!...the end result will be a very much desired Tudor and an heirloom for you to enjoy for another 45yrs.! |
|||||||||
|
Dragnattck 3T WIS
|
Graham what an awesome watch and project. I wish i had your knowledge and skills.. I can not wait to see it all put together. Thanks for posting your progress and your descriptions. Greg |
|||||||||
|
Tony Duronio 3T WIS
|
You guys amaze me with your talent and eye for restoration. Looks fantastic Graham, look forward to the finished product |
|||||||||
|
Hammerfjord Moderator
|
Nice to see some progress on your old "Safari watch"! The case back result could not be better... Best luck for the rest Graham! Got me new phone on my side and mail between 2 steel plate cuts... |
|||||||||
|
Graham 3T WIS
|
I appreciate the positive feedback, guys! I do find this project most rewarding. Tony, thanks for the compliment, but I'm nowhere near knowledgeable enough when it comes to watches. In this case I'm merely the project manager, farming the work out and taking care of payments! Will, don't get your new phone all banged up on the job! |
|||||||||
|
bigrustypig 3T WIS
|
I don't know how the heck I missed the original March 1 post, Graham. Big Congrats on the development of your project and I really think you have tons of guts to embark on such a restoration. But as you said, it's a sentimental thing and with that, no value can be placed. Hoping to see your final transformation and the Rose resurrected.yahoo.gif Thanks for the tip on the other guy. |
|||||||||
|
Graham 3T WIS
|
Well, this morning the call came that I had been looking forward to for such a long time: "Ze vats ies ready" (German for the watch is ready and bring a lot of cash" I was busy working on one of my vintage cars, but before you could say TUDOR I was on my bike and negotiated the heavy Saturday morning traffic into downtown Cape Town to collect my watch. Incredible how many tourists have already ascended onto our neck of the woods for the FIFA world cup. Anyway, back to the sub. Manfred proudly removed the watch from the winder it has been living on for the last few days. He is still old school and likes to thoroughly check a watch before it goes out. The final result blew me away. Yes, I have already seen all the components, but somehow the sum total of the parts were more than I had expected: a beautifully restored Tudor small rose sub 7928 with just the right amount of patina! He assured me that the replacement movement was in excellent condition, and that in fact as far as he could see, he was the first watchmaker to service it! WOW! What a luck considering I bought it in good faith from a vandor in Denmark. When I got home, the sub went straight onto the timing machine to check Manfred's claims. I couldn't believe my eyes: running spot on, with no errors whatsoever and a very healthy amplitude to boot. To crown it all, it passed a 100m WR test! Enough said. Below are some Q&D's. I'm a happy chappy! I love it when a plan comes together! On the timing machine: ![]() In the weak fall sunshine you can see the nicely patinated dial ![]() ![]() ![]() ![]() with a sibling, the 14060 Rolex ND ![]() ![]() .......and the obligatory wrist shot! ![]() Well, thanks for taking an interest in my little project. Total cost to me was just under US$1K. Well worth it for me. Last edited on Sat Jun 5th, 2010 08:40 am by Graham |
|||||||||
|
Paxman 3T WIS
|
Oh meine Güte!! (Tha's German for Oh my goodness!) |
|||||||||
|
Nordstrom 3T WIS
|
Fantastic!!! Thank you for letting us along on your journey. That is a neat story and a great watch. |
|||||||||
|
oagaspar Site Founder
|
Congrats Graham on a awesome Tudor!...I know the wait was well worth it especially when the final product turns out so well.....Amazing! |
|||||||||
|
Hammerfjord Moderator
|
Superb mein Sub.Keiser! I love it |
|||||||||
|
stew77 Admin
|
Wow Graham!!!... Congratulations on a truly outstanding Tudor restoration...the results are absolutely spectacular!!! I am very happy for you, as being able to restore a truly sentimental piece like this back to it's former glory has to be extremely rewarding. Thanks so much for sharing the details of this very long road to refurbishment nirvana...I think that the $1k invested (along with much time and effort) has yielded something truly priceless for you!!! Enjoy it Graham!!!! |
|||||||||
|
bigrustypig 3T WIS
|
Big Congrats, Graham. What an amazing transformation and truly a work of horological love I'm quite sure that Tudor will be among the keystones of your collection, amigo. Enjoy it in good health. |
|||||||||
|
natevan70 3T WIS
|
||||||||||
|
Graham 3T WIS
|
The positive feedback is appreciated - thanks 3T! |
|||||||||
|
IanM 3T WIS
|
Graham - the vintage cars are a bit like these old watches, aren't they. There can be nothing more rewarding than returning them to their former glory, and adding your own twist to their history. Huge kudos, Graham. Congratulations on the "new" heirloom ~ it is absolutely stunning! Ian |
|||||||||
|
Devin 3T WIS
|
That is a true grail! What a great read with photos Graham! Thanks for the write up and i love the vintage sub! Enjoy that one all over again!drool.gif |
|||||||||
|
Nabco 3T WIS
|
It turned out AWESOME Graham...BIG CONGRATS |
|||||||||
|
Graham 3T WIS
|
Thanks guys, I appreciate the feedback. |
|||||||||
|
Simon_Leung 3T WIS
|
Beautiful restoration,Graham and a big congratulations on such a project. Cheers, Simon |
|||||||||
|
Graham 3T WIS
|
Thanks, Simon. Good to see you around again. |
|||||||||
|
Graham 3T WIS
|
Thought I'd share a small twist in the tale: The cal. 390 Tudor movement which was removed from my watch and replaced with another one I sourced from Denmark was put up for sale on the bay for $350 "buy it now". Of course I described it truthfully, and declared the fact that the auto wind function was not working..... Anyway, after listing it, I wanted to check it for myself, but couldn't find it. I thought I had made a mistake, but a few seconds later I got mail from ebay: the item was bought within a few minutes from being listed! Unbelievable what the demand for these movements is.... Bottomline is, my restoration costs have now come down 30% on this puppy! Last edited on Mon Jun 21st, 2010 04:56 am by Graham |
|||||||||
|
bigrustypig 3T WIS
|
Wow! Great to learn about that, Graham. I think now, more than ever, your move on the restoration was totally worth it |
|||||||||
|
IanM 3T WIS
|
bigrustypig wrote: Wow! Great to learn about that, Graham. I think now, more than ever, your move on the restoration was totally worth it +1, Graham. Well done! Ian |
|||||||||
|
Paxman 3T WIS
|
+2 Graham... but this project was worth it regardless!dancing.gif |
|||||||||
|
Hammerfjord Moderator
|
I agree with that also. For me, when a Tudor house a movement like this, it's worth a vintage Rolex. Cases are made the same way and the movement got the same origin for sure... Without getting any money back, it was still worth it: It's a nice collector. |
|||||||||