TimeTechTalk.com Home

TimeTechTalk.com > Time Tech Talk > New Arrivals > Incoming from Island Watch - Swiss Made Black Marcello C Nettuno GMT

Welcome to 3T! Please take the time to register and join in on the friendly,knowledgeable watch talk.Please note that not all registrations will receive an immediate activation e-mail.Those who do not receive an immediate notification will be activated manually within 48hrs. by an admin. without an e-mail activation url sent to you,you may then sign in using your username and password,if you feel there is a problem please e-mail us at timetechtalk@hotmail.com and include your name and username and we activate your account.Thank You!

 Moderated by: 3T  
AuthorPost
mcwright
Admin


Joined: Wed Sep 28th, 2005
Location: SCOTTSDALE, AZ
Posts: 4759
Status: 
Offline
Just received this a few minutes ago via FEDEX. Nice packaging, heavy too. I haven't taken the watch out yet, so a Ken C type picture will have to do along with some pictures of the packaging. It is a 40mm case, GMT Swiss Made ETA movement, sapphire crystal front and back, screw-in bracelet links, screw down crown, rotating 24 hr. bezel, GMT hand, Superluminova treated hands and indicies, etc.




srh_pres
3T WIS


Joined: Wed Nov 15th, 2006
Location: Orlando, Florida USA
Posts: 6057
Status: 
Offline
Congrats Mike... thats a beauty! :cool:

Tony Duronio
3T WIS


Joined: Thu Sep 29th, 2005
Location: Clinton Twp, Michigan USA
Posts: 12862
Status: 
Offline
Very nice Mikehand6.gif

oagaspar
Site Founder


Joined: Sun Sep 4th, 2005
Location: Akron, USA
Posts: 29076
Status: 
Offline
Awesome Mike Congrats can't wait to see your Pics!You are gonna' love that Timepiece...wait until you unwrap it and see how nice the fit&finish are and the sweet eta engine!

yamahaki
Guest
 

Joined: 
Location:  
Posts: 
Status: 
Offline
Very nice snag. Give us a review!:D

mcwright
Admin


Joined: Wed Sep 28th, 2005
Location: SCOTTSDALE, AZ
Posts: 4759
Status: 
Offline
Thanks everyone. I gotta email Marc and find out if there is such a thing as metric flat head screws. Meaning the cut in the head. I tried to loosen the screws in the bracelet with my jewelers set and they don't fit snug. Plus, King Kong must have tightened them.

IW
3T WIS


Joined: Mon Apr 3rd, 2006
Location: Huntington, New York USA
Posts: 1400
Status: 
Offline
Of course there are metric regulars, but the problem here is probably the use of a jewelers screwdriver. The heads are usually filed way too thin. I've found that a good electricians flathead works great; and you can even put a bit of electrical tape around the head to ensure no scratches.

In my engineering opinion (I'm no watchmaker, but I am an engineer :) ), link screws are the largest thread found on a watch - thus the torque used to tighten/loosen is beyond what a regular watchmaker's driver is designed to handle.

I'm sure others will chime in. . .  LETS SEE THOSE PICS!!!!

mcwright wrote:
Thanks everyone. I gotta email Marc and find out if there is such a thing as metric flat head screws. Meaning the cut in the head. I tried to loosen the screws in the bracelet with my jewelers set and they don't fit snug. Plus, King Kong must have tightened them.

mcwright
Admin


Joined: Wed Sep 28th, 2005
Location: SCOTTSDALE, AZ
Posts: 4759
Status: 
Offline
King Kong did not tighten the screws. The watchmakers back in Germany use loctite when they put the screws in. There is a card in the box that looks like a business card. On the back are instructions for removing the screws.

coyote2.gif
You must heat the links/screws first.
Then you can loosen the darn screws. So, I got out my steam cleaner and gave the links a good blast on the threaded ends.

I filed down one of my jewelers screw drivers (sacrificed it) to fit in the holes and the screws came right out. No problem. Now, I have to see if I have the recommended loctite to secure them when I put them back in so they are like they came from the factory.

oagaspar
Site Founder


Joined: Sun Sep 4th, 2005
Location: Akron, USA
Posts: 29076
Status: 
Offline
mcwright wrote:
I had to take a look see and sure as **** there it was ...Locktite 243!!!..No wonder it was tough to get those screws out!mistake.gif Now take some of your Awesome Pics Mike!!!hand6.gif King Kong did not tighten the screws. The watchmakers back in Germany use loctite when they put the screws in. There is a card in the box that looks like a business card. On the back are instructions for removing the screws.

coyote2.gif
You must heat the links/screws first.
Then you can loosen the darn screws. So, I got out my steam cleaner and gave the links a good blast on the threaded ends.

I filed down one of my jewelers screw drivers (sacrificed it) to fit in the holes and the screws came right out. No problem. Now, I have to see if I have the recommended loctite to secure them when I put them back in so they are like they came from the factory.

KenC
Admin


Joined: Sun Sep 4th, 2005
Location: Florida &, Arizona USA
Posts: 11288
Status: 
Offline
Mike,

Beautiful watch....glad you are now using a professional photographer!!!toon1.gif

KenC
Admin


Joined: Sun Sep 4th, 2005
Location: Florida &, Arizona USA
Posts: 11288
Status: 
Offline
Okay..............now you've done it....I'm going to have to email Marc and see if he can set up 52 value pays!

mcwright
Admin


Joined: Wed Sep 28th, 2005
Location: SCOTTSDALE, AZ
Posts: 4759
Status: 
Offline
Glad you are now using a professional photographer!!!

He's very reasonable too! smile25.gif


Lead Theme By: Di @ UltraBB
UltraBB 1.17 Copyright © 2007-2012 Data 1 Systems
Page processed in 0.3549 seconds (80% database + 20% PHP). 29 queries executed.