|
|
| Welcome to 3T! Please take the time to register and join in on the friendly,knowledgeable watch talk.Please note that not all registrations will receive an immediate activation e-mail.Those who do not receive an immediate notification will be activated manually within 48hrs. by an admin. without an e-mail activation url sent to you,you may then sign in using your username and password,if you feel there is a problem please e-mail us at timetechtalk@hotmail.com and include your name and username and we activate your account.Thank You! |
| Moderated by: 3T |
|
||||||||||||||
| Resizing metal watch band | Rating: 
|
| Author | Post |
|---|
| Posted: Thu Sep 28th, 2006 05:04 pm |
|
1st Post |
|
jsb806f Guest
|
I have experience resizing my metal watch bands IF the bands use a traditional "pin" system. I just purchased a Pulsar for my wife and a Swiss Army for myself. The band uses a different system for connecting links (not pins). I see arrows on the underside of the band point in the direction that links should be removed but it isn't intuitive how to remove it. I suspect there is a special tool that I don't know about for resizing this type of band. Any help would be appreciated. Thank you. Last edited on Thu Sep 28th, 2006 05:05 pm by |
||||||||||||||
| |||||||||||||||
| Posted: Thu Sep 28th, 2006 05:29 pm |
|
2nd Post |
|
e.avery 3T WIS 
|
Stupid question but I will ask it any way is it a flex fit band?
|
|||||||||||||
| ||||||||||||||
| Posted: Thu Sep 28th, 2006 05:44 pm |
|
3rd Post |
|
jsb806f Guest
|
No. :)
|
||||||||||||||
| |||||||||||||||
| Posted: Thu Sep 28th, 2006 05:47 pm |
|
4th Post |
|
e.avery 3T WIS
|
It there is no hole and it is not a flex fit or a ceranic I can not even guess on how to do it. Can you post a pic?
|
|||||||||||||
| ||||||||||||||
| Posted: Thu Sep 28th, 2006 05:51 pm |
|
5th Post |
|
oagaspar Site Founder 
|
It could be a flat pin system...if there is a hole in the underside/middle area of the bracelet you need to take a small screw driver and push inside the hole one way or another to release the pin in order to size/remove the link...otherwise have you checked to see if they are just screwed in rather than pushpins?:)
|
||||||||||||||
| |||||||||||||||
| Posted: Thu Sep 28th, 2006 06:45 pm |
|
6th Post |
|
mcwright Admin 
|
If it is a Pulsar, it most likely is what Oscar says it is. It is a flat piece of metal about 1/8" wide. In addition to looking for a hole, look for a raised bump and push on it (with small screw driver) in the direction of the arrow. You may have to put a little "grunt" into it to get it to move. :)
|
|||||||||||||
| ||||||||||||||
| Current time is 11:50 pm | |
| TimeTechTalk.com > Time Tech Talk > Time Talk > Resizing metal watch band | Top |
